To have auto glass replacement is quite massive to deal with. Hence, if you have just had the windows or windshields of your vehicle replaced, you surely would want the installation to last long. Sadly, there are a lot of deceitful auto glass shops that do half-baked and inaccurate work with low-quality products. As a result, the auto glass replacement becomes potentially hazardous and substandard. When your car has recently had replacement of auto glass, here are the following problems that you need to pay attention to:
Blurry or wavy glass
A freshly installed auto glass must have a crystal-clear and smooth appearance all the time. When your newly mounted windows or windshield appear bumpy, wavy, or blurry, that is a guaranteed indicator that the previous auto glass shop installed poor quality aftermarket glass for your car. Every time you have your windshield changed, you need to know from them whether the shop utilizes manufacturer-produced or OEM glass. A lot of deceiving shops tend to use and go for low-quality and substandard products to increase their bottom lines. As a result, their clients, unfortunately, have the deal’s raw end. Because of this, it’s really important to only choose the most reputable company within your area.
Weird noises at high speeds
If you have recently observed weird whooshing sounds as you drive along the highway, then such noises are great signs that your vehicle had a bad auto glass installation job. The noise could extend from unmistakably unique to barely audible, which depends on the problem’s severity. Hence, even though you can barely hear it, it is vital to have your auto glass checked by an expert.
After you have had installed a new auto glass, it is vital to inspect whether there are signs of leaks. If you haven’t taken your car on a rainy day, you can check for glass leaks with one of the methods below:
- Horse test
This is a two-person test. Meaning, if you have someone who can assist you out, ask them to sit in your vehicle as you grab a hose. To do this test, use a stream of water from a car wash or a regular garden hose and spray your auto glass with it. Request him/her to see if the water enters the car at any part along with the windows or windshield’s outer edges.
- Soapy water test
Pour water with soap at your vehicle’s window and windshield’s edges. Then, get into your car and utilize an air nozzle to direct an air stream along the glass edges. Once the windshield starts leaking, the air will create and form bubbles in the soapy water on the glass exterior.
After trying such tests an finding out that your car has indeed leaks, it just means that the technicians who installed the glass weren’t able to properly seal the edges. You will have to take your car to a reputable auto glass repair shop to know whether the seal can still be salvaged or not.